ID Roller Burnishing Tools, Inside Diameters Roller Burnishing Tool Manufacturer & Exporter & Supplier

How to select rollers for burnishing tool?

How to select rollers for burnishing tool?

 

  1. Ball burnishing

The ball can rotate freely when rolling with ball, which means there is no sliding rolling in the main motion and feed direction. Therefore, the surface quality of the processed part is good.

Surface roughness after ball burnishing Ra 0. 2 m ~ 0. 10 m) is very low. Ra0.05 / xm can also be achieved under the condition of matching the other process parameters, so the surface quality of the rolled parts is good. The contact surface between the ball and the workpiece surface is relatively small. Therefore, under the same unit pressure, the total pressure of ball burnishing tool can be reduced and the rolling pressure is lighter. It is suitable for small and slender precision parts of the outer surface and thin-walled parts of the inner hole rolling pressure. The ball burnishing tool is simple in structure and light in weight. When the ball is worn, the low price standard ball rolling tool can be used to reduce the cost to a certain extent.

 

  1. Pin roller burnishing

Pin roller burnishing tool can not only obtain good surface roughness like ball roller pressure, but also overcome the disadvantages of low ball life and adopt large feed quantity. Generally, 0.75mm/r~0.80mm/r is used for rolling pressure, so its production efficiency is high.

 

  1. Turning tool burnishing

The structure is basically the same as that of the turning tool, and the operation is the same as that of the turning tool. However, lathe burnishing tool is suitable for rolling edge of parts, and it is more suitable for rolling process of high hardness materials.