Internal & External Groove Single Roller Burnishing Tool, ID Groove Single Roller Burnishing Tool, Single Roller Groove Burnishing Tools, Groove Burnishing Tools Manufacturer, Groove Burnishing Tools Supplier, Cheap Groove Burnishing Tools
Internal & External Groove Single Roller Burnishing Tools Manufacturer & Exporter & Supplier

Internal & External Groove Single Roller Burnishing Tools Manufacturer & Exporter & Supplier

Find quality single roller burnishing tools from RBT. We are roller burnishing tool manufacturer & exporter & supplier in China. We offer fast customization and special order service to our customers.

Compare

Description

Internal & External Groove Single Roller Burnishing Tool, ID Groove Single Roller Burnishing Tool, Single Roller Groove Burnishing Tools, Groove Burnishing Tools Manufacturer, Groove Burnishing Tools Supplier, Cheap Groove Burnishing Tools

Single Roller Burnishing Tool, Internal & External Groove Single Roller Burnishing Tool, ID and OD Groove Single Roller Burnishing Tool, Single Roller Groove Burnishing Tools, Groove Burnishing Tools Manufacturer, Groove Burnishing Tools Supplier, Cheap Groove Burnishing Tools

 

Introduction to products:

Single Roller Internal Groove Burnishing Tools can be used for smoothening and work hardening of external and internal grooves.

 

Advantages:

  • Useable for both external and internal grooves
  • Are not dependent on diameters of the workpiece

 

Single Roller Internal Groove Burnishing Tools for External Use

Application "internal" from Ø 50 mm and up to 120 mm depth
Application "external" from Ø 20 mm
Roller tailor made

 

Application parameters:

Please note that this information represents standard values which must be adapted to the individual cases.

Speed up to 100 m/min depending on the application
Feed rate 0.05 — 0.3 mm/rev
Workpiece allowance up to 0.03 mm
Tool pre-load up to 1.5 mm
Lubrication emulsion or oil; filtration of the lubricant (< 40 μm) can improve the surface quality and the tool life
Pre-machining of workpiece surface roughness up to 15 μm
Workpiece hardness up to 45HRC